U.S. markets close in 32 minutes

New Pacific Metals Corp. (NUPMF)

Other OTC - Other OTC Delayed Price. Currency in USD
Add to watchlist
3.9799-0.3501 (-8.09%)
As of 3:11PM EDT. Market open.
Full screen
Trade prices are not sourced from all markets
Gain actionable insight from technical analysis on financial instruments, to help optimize your trading strategies
Chart Events
Neutralpattern detected
Previous Close4.3300
Open4.1300
Bid0.0000 x 0
Ask0.0000 x 0
Day's Range3.9000 - 4.3500
52 Week Range1.6800 - 5.6000
Volume200,651
Avg. Volume136,328
Market Cap602.294M
Beta (5Y Monthly)1.51
PE Ratio (TTM)N/A
EPS (TTM)-0.0190
Earnings DateN/A
Forward Dividend & YieldN/A (N/A)
Ex-Dividend DateN/A
1y Target EstN/A
Fair Value is the appropriate price for the shares of a company, based on its earnings and growth rate also interpreted as when P/E Ratio = Growth Rate. Estimated return represents the projected annual return you might expect after purchasing shares in the company and holding them over the default time horizon of 5 years, based on the EPS growth rate that we have projected.
Fair Value
XX.XX
N/A
Research that delivers an independent perspective, consistent methodology and actionable insight
Related Research
View more
  • GlobeNewswire

    New Pacific Metals Reports 2020 Annual General and Special Meeting Results

    VANCOUVER, British Columbia, Oct. 01, 2020 (GLOBE NEWSWIRE) -- New Pacific Metals Corp. (“New Pacific” or the “Company”) is pleased to report that all matters submitted to the shareholders for approval as set out in the Company's Notice of Meeting and Information Circular dated August 27, 2020 (the “Circular”) were approved by the requisite majority of votes cast at the annual general and special meeting of the shareholders held on September 30, 2020 (the “AGSM”). A total of 152,310,111 common shares, representing 56.9% of the votes attached to all outstanding shares as at the record date for the meeting were represented at the AGSM. The details of the voting results for the election of directors are set out below: Votes ForWithheld Votes DirectorNumberPercentageNumberPercentage Jack Austin73,265,36599.78%164,5210.22% Dr. Rui Feng73,345,69899.89%84,1880.11% Dr. Mark Cruise73,346,72499.89%83,1620.11% David Kong73,296,16699.82%133,7200.18% Greg Hawkins73,299,30099.81%130,5860.18% Martin Wafforn73,343,26399.88%86,6230.12% At the AGSM, shareholders also voted: (a) 99.77% in favour of approving the arrangement providing for, among other things, the distribution of the common shares of Whitehorse Gold Corp. (“Whitehorse”) held by New Pacific to New Pacific shareholders, as more particularly described in the Circular; and (b) 99.31% in favour of approving the private placement of Whitehorse common shares (the “Whitehorse Financing”), as more particularly described in the Circular. The Whitehorse Financing was approved by the requisite majority of disinterested shareholders within the meaning of the TSX Company Manual. Shareholders also approved the Company’s amended and restated share based compensation plan and the re-appointment of Deloitte LLP as auditors of the Company for the ensuing year. Final results for all matters voted on at the AGSM will be filed on SEDAR at www.sedar.com and on the Company's website.ABOUT NEW PACIFIC New Pacific is a Canadian exploration and development company which owns the Silver Sand Project in Potosí Department, Bolivia and the Tagish Lake Gold Project in Yukon, Canada.For further information, contact: New Pacific Metals Corp., Gordon Neal President Phone: (604) 633-1368 Fax: (604) 669-9387 info@newpacificmetals.com   www.newpacificmetals.com CAUTIONARY NOTE REGARDING FORWARD-LOOKING INFORMATIONCertain of the statements and information in this news release constitute “forward-looking information” within the meaning of applicable Canadian provincial securities laws. Any statements or information that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance (often, but not always, using words or phrases such as “expects”, “is expected”, “anticipates”, “believes”, “plans”, “projects”, “estimates”, “assumes”, “intends”, “strategies”, “targets”, “goals”, “forecasts”, “objectives”, “budgets”, “schedules”, “potential” or variations thereof or stating that certain actions, events or results “may”, “could”, “would”, “might” or “will” be taken, occur or be achieved, or the negative of any of these terms and similar expressions) are not statements of historical fact and may be forward-looking statements or information. Forward-looking statements or information are subject to a variety of known and unknown risks, uncertainties and other factors that could cause actual events or results to differ from those reflected in the forward-looking statements or information, including, without limitation, risks relating to: fluctuating equity prices, bond prices, commodity prices; calculation of resources, reserves and mineralization, foreign exchange risks, interest rate risk, foreign investment risk; loss of key personnel; conflicts of interest; dependence on management and others. This list is not exhaustive of the factors that may affect any of the Company’s forward-looking statements or information. Forward-looking statements or information are statements about the future and are inherently uncertain, and actual achievements of the Company or other future events or conditions may differ materially from those reflected in the forward-looking statements or information due to a variety of risks, uncertainties and other factors, including, without limitation, those referred to in the Company’s Annual Information Form for the year ended June 30, 2020 under the heading “Risk Factors”. Although the Company has attempted to identify important factors that could cause actual results to differ materially, there may be other factors that cause results not to be as anticipated, estimated, described or intended. Accordingly, readers should not place undue reliance on forward-looking statements or information. The Company’s forward-looking statements or information are based on the assumptions, beliefs, expectations and opinions of management as of the date of this news release, and other than as required by applicable securities laws, the Company does not assume any obligation to update forward-looking statements or information if circumstances or management’s assumptions, beliefs, expectations or opinions should change, or changes in any other events affecting such statements or information. For the reasons set forth above, investors should not place undue reliance on forward-looking statements or information.

  • New Pacific Extends Broad Areas of Silver Mineralization at Its  Silverstrike Project, Bolivia
    GlobeNewswire

    New Pacific Extends Broad Areas of Silver Mineralization at Its Silverstrike Project, Bolivia

    Highlights 1,865 g/t Ag and 0.96% Pb over 2.0 m and 1,665 g/t Ag, 0.43% Pb and 1.42% Cu over 2.0 m FIGURE 1 SIMPLIFIED GEOLOGY MAP OF CORE BERENGUELA MINING DISTRICTVANCOUVER, British Columbia, Sept. 29, 2020 (GLOBE NEWSWIRE) -- New Pacific Metals Corp. (“New Pacific” or the “Company”) is pleased to provide an update on its exploration activities at its Silverstrike Project, Bolivia. New Pacific acquired a 98% interest in the Project in December 2019 (please refer to news release dated December 4, 2019). Reconnaissance and detailed mapping and sampling programs have been completed on the northern portion of the Project. The results to date indicate good to excellent exploration potential for hosting narrow high-grade and near-surface broad-zones of silver mineralization. Summary highlights of the results received to date are tabulated below in Table 1 (1) (2) (3):Table 1 – Summary Assay Results from the Silverstrike North (1) (2) (3) Area/ZoneSample TypeHighlight Assay ResultsComment Valley Zone Channel Chip689 g/t Ag and 0.63% Pb over 1.5 mUnderground Channel Chip1,100 g/t Ag and 0.61% Pb over 1.1 mUnderground North TopChannel Chip696 g/t Ag, 12.25% Pb and 0.14% Zn over 2.0 mSurface outcrop TarafayaChannel Chip909 g/t Ag, 3.68% Pb and 0.12% Cu over 1.8 mSurface outcrop South Top Channel Chip906 g/t Ag, 0.39% Pb and 0.57% Cu over 1.5 mSurface outcrop Mine Dump Grab1,185 g/t Ag, 10.55% Pb, 0.18% Zn, 1.15% CuSurface mine dump CP Zone Channel Chip1,665 g/t Ag, 0.43% Pb, 0.36% Zn, 1.42% Cu over 2.0 mUnderground Channel Chip1,865 g/t Ag, 0.96% Pb, 0.17% Cu over 2.0 mSurface outcrop Mine Dump Grab888 g/t Ag, 0.29% Pb, 1.86% Zn, 3.41% CuSurface mine dump West TopChannel Chip960 g/t Ag, 0.43% Pb and 0.12% Cu over 0.8 m; 457 g/t Ag, 0.27% Pb over 2.0 mSurface mine dump Breccia Zone Channel Chip54 g/t Ag, 5.64% Pb, 19.5% Zn over 1.1 mSurface outcrop Mine Dump Grab713 g/t Ag, 7.66% Pb and 4.5% ZnSurface mine dump San Luis Mine Channel Chip178 g/t Ag and 2.91% Pb over 1.1 mUnderground Mine Dump Grab504 g/t Ag, 10.6% Pb, 0.14% Zn and 0.81% CuSurface mine dump Lourdes Ines Mine Channel Chip239 g/t Ag and 6.59% Pb over 0.5 mSurface outcrop Mine Dump Grab1,675 g/t Ag, 18.35% Pb, 2.03% Zn and 0.6% CuSurface mine dump Turini Zone Channel Chip257 g/t Ag, 4.64% Pb and 11.4% Zn over 0.9 mSurface outcrop Mine Dump Grab3,220 g/t Ag, 51.18% Pb, 14.95% Zn and 1.76% CuSurface mine dump (1) The highlights are sourced from the assay results of 2,751 samples taken to date at Silverstrike North area. (2) Grab samples are selective in nature and are not necessarily representative of in situ mineralization. (3) Channel chip sample interval is close to true width as samples were collected across and normal to mineralized structures. Detailed Mapping and Sampling ProgramSilverstrike North is centred on the historic Berenguela Mining District and is characterized by abundant historic mine adits, declines, shafts and spoil heaps scattered intermittently over an approximately 3.5 by 2.2 km area. It includes the Valley Zone, North Top, Tarafaya Mine, South Top, West Top, and CP Zone in addition to the former San Luis Mine, Lourdes Ines Mine and the Turini Mine which are discussed below (Figure 1).In March 2020, the Company initiated an integrated exploration program consisting of 1:5000 scale reconnaissance and 1:500 scale detailed geological, structural and alteration mapping and geochemical sampling programs. The program aimed to geologically define and sample the extents of the hydrothermal system(s), including extensive Spanish Colonial-era historic workings to develop drill targets.The exploration team identified and sampled numerous mining adits, declines, shafts and surface open pits. Historic mining operations were developed along steeply dipping fracture zones which ranged from 0.5-2 meters wide developed in altered / bleached Tertiary aged sandstones. In addition, several new mineralized zones were identified as part of the field work.A total of 2,751 samples were collected including 2,607 channel chip samples and 144 mine dump grab samples. Majority of the samples were taken from surface outcrops of alteration and mineralization. All 2,751 assay results have been received of which, 56 samples have silver grades >300 g/t (average 696 g/t Ag), 163 samples with >100 g/t (average 347 g/t Ag), and 236 samples >50 g/t (average 262 g/t Ag).Representative channel chip samples were collected perpendicular to outcropping altered fractures, however, in many areas historic mining activities and resultant waste dumps obscure the facture zones. Underground channel chip sampling across mineralized zones typically returned grades ranging from a few hundred to more than one thousand ppm Ag and associated base metals (Pb, Zn and Cu – see tables for details).DETAIL – see Figure 1 for locationsValley Zone forms the core of the Berenguela Mining District and is defined by abundant historic mine workings over an area of approximately 1,800 m long in an E-W direction and 300 m wide in a N-S direction (Figure 1). Six adits were mapped and sampled and 20 channel chip samples of mineralized veins were collected returning average grades of 306 g/t Ag, 1.06% Pb over 1.08 m with the best interval of 1.1 m @ 1,100g/t Ag and 0.61% Pb from the San Jose Mine Adit -4.A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/4113a5ed-a9a9-46e3-bc12-9e216bc34c96North Top Zone located immediately north of the Valley Zone is comprised of sub-horizontal sandstones cut by NWW striking mineralized fractures over an area 1,600 m long in E-W direction and 300 m wide in a N-S direction (Figure 1). Channel chip sampling returned grades up to 696 g/t Ag and 12.25% Pb over 2 m.Tarafaya Mine Zone is located approximately one kilometre to the north of Berenguela village (Figure 1). The channel chip sampling across mineralized fractures returned grades of up to 909 g/t Ag, and 3.68% Pb over 1.8 m, and 455 g/t Ag and 1.31% Pb over 1.4 m.West Top Zone forms a topographic high of horizontal sandstones adjacent to the Valley Zone (Figure 1). Mine dump grab sampling returned grades up to 265 g/t Ag and 0.53% Pb, and channel chip sampling returned up to 960 g/t Ag and 0.43% Pb over 0.8 m, and 457 g/t Ag and 0.27% Pb over 2 m.South Top Zone is a flat area of sub-horizontal sandstones cut by numerous NWW striking mineralized fractures defining a mineralized corridor 1,600 m long in E-W direction and 300 m wide in N-S direction (Figure 1).The team collected 448 samples of which grab sample results returned values up to 1,185 g/t Ag, 10.55% Pb and 1.15% Cu and the highest channel chip channel sample results of 906 g/t Ag, 0.39% Pb and 0.57% Cu over 1.5 m. Table 2 summarizes assay results with silver grades higher than 300 g/t.Table 2 \- Summary of Assay Results from the South Top Zone (1) (2) Sample Agg/tPb_%Cu_%Sample type SCH0018984280.370.032m chip SHC0001474130.480.38dump SHC0001483680.070.07dump SHC0002015230.050.011m chip SHC0002023070.761.45dump SHC0002093250.240.73dump SHC0002131,18510.551.15dump SHC0002239060.390.571.5m chip SHC0002256871.360.66dump SHC0002325940.130.12dump SHC0002337970.290.29dump (1) Grab dump samples are selective in nature and are not necessarily representative of in situ mineralization. (2) Channel chip sample interval is close to true width as chip samples were taken across and normal to mineralized structures. CP Zone, site of the former Nelly Mine, covers an area of 2,500 m long in E-W direction and 800 m wide in N-S direction and is defined by extensive areas of talus material and widespread mining dumps (Figure 1). This structural fairway extends into the West Top Zone.Systematic dump grab sampling (a total of 82 samples) returned average grades of 129 g/t Ag, 0.54 Pb%, 0.48% Zn and 0.34% Cu with the highest value of 888 g/t Ag, 0.29% Pb, 1.86% Zn and 3.41% Cu.Underground channel chip sampling in five adits returned values up to 1,665 g/t Ag, 0.43% Pb, 0.36% Zn and 1.42% Cu over 2 m. Surface channel chip sampling across mineralized fractures returned values up to 1,865 g/t Ag, 0.96% Pb and 0.17% Cu over 2 m. Table 3 summarizes assay results with silver grades higher than 300 g/t.Table 3 \- Summary of Assay Results from the CP Zone Sample Ag_ppmPb_%Zn_%Cu_%Sample type SCH0014966170.170.310.660.5m chip SCH0014973150.050.440.280.7m chip SHC0000093000.80.140.19dump SHC0000143460.340.220.35dump SHC0000234470.050.050.34dump SHC0000403740.440.340.51dump SHC0001083380.170.052.27dump SHC0001101,8650.960.020.172m chip SHC0001123270.180.160.82dump SHC0001135274.361.070.42dump SHC0001148880.291.863.41dump SHC0001334340.620.540.48dump SHC0009171,6650.430.361.422m chip (1) Grab dump samples are selective in nature and are not necessarily representative of in situ mineralization. (2) Channel chip sample interval is close to true width as chip samples were taken across and normal to mineralized structures. Breccia Zone is located to the west of Berenguela village (Figure 1). It is a sporadically outcropping, NNW trending, tectonic-hydrothermal breccia zone of about 2 km long and up to 50 m wide. Historic mine workings (adits, surface cuts and mine dumps) occur along its length. Two mine dump grab samples returned values of 713 g/t Ag, 7.66% Pb and 4.5% Zn and 223 g/t Ag, 0.41% Pb, 0.59% Zn and 1.27% Cu, respectively. Channel chip samples from surface reported grades up to 54 g/t Ag, 5.64% Pb and 19.5% Zn over 1.1 m.San Luis Mine Zone forms the northernmost extent of the Silverstrike North area and is comprised of mineralized fracture zones developed in sub-horizontal altered Tertiary sandstones. These fracture swarms constitute a broad corridor approximately 1 km long in an east-west direction and up to 70 m wide in north-south direction. Mine dump grab sampling of seven samples returned average grades of 157 g/t Ag, 6.71% Pb and 9.52% Zn with the highest returning 504 g/t Ag, 10.6% Pb and 0.81% Cu. Channel chip sampling across an accessible underground drift returned grades up to 178 g/t Ag and 2.91% Pb over 1.1 m.Lordes Ines Mine Zone is located 2,300 m to the southwest of the Berenguela village. The zone is dominated by two sets of cross cutting mineralized fractures developed in sub-horizontal Tertiary sandstones. Interaction between the crosscutting fractures forms a stockwork of veinlets and crackle breccia mappable as a broad mineralized structural corridor of circa 2 km long and 100 m wide. Many of the former mine workings are inaccessible however mine dump grab sampling returned average grades of 635 g/t Ag, 18.43% Pb, 0.95% Zn and 0.79% Cu (n=5) with the highest values of up to 1,675 g/t Ag, 18.35% Pb, 2.03% Zn and 0.6% Cu.Seventy-five channel chip samples of surface fractures returned grades up to 239 g/t Ag and 6.59% Pb over 0.5 m wide, and a channel chip sample from a breccia zone returned grades of up to 94 g/t Ag, 2.62% Pb and 3.06% Zn over 1.5 m.Turini Mine Zone is located 1.8 km to the west of Berenguela village. Mine dumps are distributed along a corridor of 1,100 m long and up to 50 m wide. Five mine dump grab samples returned average grades of 886 g/t Ag, 18.88% Pb, 5.33% Zn, 0.72% Cu with the highest values up to 3,220 g/t Ag, 51.18% Pb, 14.95% Zn and 1.76% Cu.Forty channel chip samples were collected with the highest returning up to 257 g/t Ag, 4.64% Pb and 11.4% Zn over 0.9 m wide. No underground workings were accessible.FUTURE WORKNew Pacific’s exploration team is currently completing mapping and sampling of the Silverstrike Central and South areas summary results of which will be released upon receipt. Following integration of the geochemical sample results and geological data, the Company will generate drill targets for testing upon receipt of required drill permits which is tentatively anticipated in Q4 2020.Quality Assurance and Quality ControlThe grab and chip samples with results released in the news release were shipped in securely sealed bags by New Pacific staff in the Company’s vehicles directly from field to ALS Global in Oruro, Bolivia for preparation, and ALS Global in Lima, Peru for geochemical analysis. All samples are first analyzed by a multi-element ICP package (ALS code ME-MS41) with ore grade over limits for silver, lead and zinc further analyzed using ALS code OG46. Further silver over limits are analyzed by gravimetric analysis (ALS code of GRA21).The assay results of the grab and chip samples are used for reconnaissance purpose, hence no certified reference materials and blank materials were inserted to the normal sample sequence in the field. However, internal QAQC results of ALS lab did not show any significant bias of analysis or contamination during sample preparation.Technical information contained in this news release has been reviewed and approved by Alex Zhang, P. Geo., Vice President of Exploration, who is a Qualified Person for the purposes of NI 43-101.ABOUT NEW PACIFIC New Pacific is a Canadian exploration and development company which owns the Silver Sand Project, in the Potosi Department of Bolivia and the Tagish Lake Gold Project in Yukon, Canada.For further information, please contact:New Pacific Metals Corp. Gordon Neal Phone: Fax:(604) 633-1368 (604) 669-9387 info@newpacificmetals.com www.newpacificmetals.com CAUTIONARY NOTE REGARDING FORWARD-LOOKING INFORMATIONCertain of the statements and information in this news release constitute “forward-looking information” within the meaning of applicable Canadian provincial securities laws. Any statements or information that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance (often, but not always, using words or phrases such as “expects”, “is expected”, “anticipates”, “believes”, “plans”, “projects”, “estimates”, “assumes”, “intends”, “strategies”, “targets”, “goals”, “forecasts”, “objectives”, “budgets”, “schedules”, “potential” or variations thereof or stating that certain actions, events or results “may”, “could”, “would”, “might” or “will” be taken, occur or be achieved, or the negative of any of these terms and similar expressions) are not statements of historical fact and may be forward-looking statements or information. The Company cautions the reader that forward-looking statements or information are subject to a variety of known and unknown risks, uncertainties and other factors that could cause actual events or results to differ from those reflected in the forward-looking statements or information, including, without limitation, risks relating to: fluctuating equity prices, bond prices, commodity prices; calculation of resources, reserves and mineralization, foreign exchange risks, interest rate risk, foreign investment risk; loss of key personnel; conflicts of interest; dependence on management and others. This list is not exhaustive of the factors that may affect any of the Company’s forward-looking statements or information. Forward-looking statements or information are statements about the future and are inherently uncertain, and actual achievements of the Company or other future events or conditions may differ materially from those reflected in the forward-looking statements or information due to a variety of risks, uncertainties and other factors, including, without limitation, those referred to in the Company’s Annual Information Form for the year ended June 30, 2020 under the heading “Risk Factors”. Although the Company has attempted to identify important factors that could cause actual results to differ materially, there may be other factors that cause results not to be as anticipated, estimated, described or intended. Accordingly, readers should not place undue reliance on forward-looking statements or information. The Company’s forward-looking statements or information are based on the assumptions, beliefs, expectations and opinions of management as of the date of this news release, and other than as required by applicable securities laws, the Company does not assume any obligation to update forward-looking statements or information if circumstances or management’s assumptions, beliefs, expectations or opinions should change, or changes in any other events affecting such statements or information. For the reasons set forth above, investors should not place undue reliance on forward-looking statements or information.CAUTIONARY NOTE TO US INVESTORSThis news release has been prepared in accordance with the requirements of Canadian National Instrument 43-101 - Standards of Disclosure for Mineral Projects (''NI 43-101'') and the Canadian Institute of Mining, Metallurgy and Petroleum Definition Standards, which differ from the requirements of U.S. securities laws. NI 43-101 is a rule developed by the Canadian Securities Administrators that establishes standards for all public disclosure an issuer makes of scientific and technical information concerning mineral projects.

  • What Type Of Shareholders Make Up New Pacific Metals Corp.'s (TSE:NUAG) Share Registry?
    Simply Wall St.

    What Type Of Shareholders Make Up New Pacific Metals Corp.'s (TSE:NUAG) Share Registry?

    Every investor in New Pacific Metals Corp. (TSE:NUAG) should be aware of the most powerful shareholder groups. Large...